ENGINEERING DISCLAIMER
Engineering Disclaimer
Redei Enterprises Pty Ltd (“Redei”, “we”, “our” or “us”) is committed to providing high-quality engineering information, technical resources and product documentation to assist customers, partners, distributors and industry professionals.
The information made available through this website, including technical documentation, specifications, product information, engineering resources and other published material, is provided for general informational purposes only.
It is not intended to replace project-specific engineering advice, professional design services or compliance assessments.
By accessing or using information published on this website, you acknowledge and agree to the terms of this Engineering Disclaimer.
Last Updated: 26 July 2026
© 2026 Redei Enterprises Pty Ltd. All rights reserved.
| Item | Details |
| Policy Owner | CEO |
Approval Authority | Redei Board |
| Version | ED:2026:001 |
Effective Date | 26 July 2026 |
Next Review Date | 26 July 2028 |
Review Frequency | Every two (2) years, or earlier where required by changes to legislation, business operations or organisational requirements. |
Engineering Disclaimer
No Engineering Advice
Unless expressly stated otherwise in a written agreement signed by Redei, information published on this website does not constitute:
* professional engineering advice;
* engineering certification;
* design approval;
* installation approval;
* regulatory approval;
* electrical advice;
* structural advice;
* legal advice;
* compliance advice;
* project-specific recommendations.
Every engineering project is unique and should be independently assessed by appropriately qualified professionals.
General Information Only
Engineering information published by Redei may include:
* product specifications;
* installation guides;
* technical drawings;
* engineering concepts;
* diagrams;
* brochures;
* white papers;
* application examples;
* photographs;
* videos;
* case studies;
* design examples;
* system architectures.
These materials are intended to provide a general understanding of Redei’s products, engineering capabilities and potential applications.
They should not be relied upon as the sole basis for engineering, procurement, construction or operational decisions.
Project-Specific Design
Every project differs according to numerous factors, including but not limited to:
* site conditions;
* environmental conditions;
* electrical supply characteristics;
* structural requirements;
* installation methods;
* customer objectives;
* applicable legislation;
* applicable Australian Standards;
* utility requirements;
* manufacturer requirements;
* equipment compatibility;
* operating conditions;
* maintenance requirements;
* future expansion requirements.
Accordingly, engineering solutions appropriate for one project may not be suitable for another.
Redei strongly recommends that all projects undergo appropriate engineering review before implementation.
Technical Documentation
While Redei takes reasonable care to ensure the accuracy of published technical information, documentation may:
* contain typographical errors;
* contain drafting errors;
* contain calculation assumptions;
* be based on prototype designs;
* reflect product versions that have since been updated;
* change without notice.
Technical documentation should always be verified against the latest published version before use.
Product Specifications
Product specifications, dimensions, ratings and performance data are subject to ongoing engineering development and continuous improvement.
Redei reserves the right to modify:
* product design;
* components;
* materials;
* dimensions;
* electrical ratings;
* firmware;
* software;
* manufacturing methods;
* installation requirements;
* operating parameters,
without prior notice where permitted by law.
Customers should confirm current specifications before purchasing, designing or installing any Redei product.
Illustrations and Product Images
Photographs, renderings, diagrams and illustrations are provided for general reference only.
Images may include:
* prototype products;
* optional accessories;
* demonstration installations;
* pre-production models;
* simulated environments;
* conceptual representations.
Actual products may vary from images shown.
Engineering Calculations
Any engineering calculations, estimates, performance projections or examples presented by Redei are illustrative unless specifically identified as project-specific.
Actual project outcomes depend upon numerous variables outside Redei’s control, including:
* installation quality;
* equipment configuration;
* operating conditions;
* environmental influences;
* maintenance practices;
* user behaviour;
* network conditions;
* utility infrastructure.
Projected performance should not be interpreted as guaranteed performance.
Compliance with Standards
Redei designs products and engineering solutions with consideration of relevant standards where applicable.
However, compliance with any legislation, regulation or standard ultimately depends upon:
* project design;
* installation practices;
* site conditions;
* equipment selection;
* commissioning;
* ongoing maintenance.
Customers remain responsible for ensuring compliance with all applicable laws, regulations, codes and standards relevant to their project.
Australian Standards
References to Australian Standards, international standards or industry guidelines are provided for general information only.
Examples may include:
* AS/NZS 3000
* AS/NZS 5139
* AS/NZS 61439
* IEC Standards
* ISO Standards
Standards are periodically updated and should always be confirmed independently.
Installation Responsibility
Redei products should only be installed, commissioned and maintained by appropriately qualified personnel where required by law.
Improper installation may result in:
* equipment damage;
* system failure;
* reduced performance;
* property damage;
* serious injury;
* death.
Redei accepts no responsibility for installations performed contrary to applicable legislation, manufacturer instructions or accepted engineering practice.
Third-Party Products
Redei may publish information relating to third-party products or technologies.
Such information is provided for convenience only.
Redei does not warrant the accuracy, completeness or ongoing availability of third-party information and accepts no responsibility for changes made by third-party manufacturers.
No Warranty
To the maximum extent permitted by law, information published on this website is provided “as is” and “as available”.
Redei makes no representation or warranty, express or implied, regarding:
* completeness;
* accuracy;
* reliability;
* suitability;
* merchantability;
* fitness for a particular purpose; or
* uninterrupted availability of website content.
Nothing in this disclaimer excludes any rights or guarantees that cannot lawfully be excluded under the Australian Consumer Law.
Limitation of Liability
To the fullest extent permitted by law, Redei shall not be liable for any direct, indirect, incidental, consequential or special loss or damage arising from reliance upon information published on this website.
This includes, without limitation:
* project delays;
* redesign costs;
* installation costs;
* procurement decisions;
* business interruption;
* loss of profits;
* equipment damage;
* consequential losses.
Users remain responsible for independently verifying the suitability of all engineering information for their specific circumstances.
Professional Advice
Before making engineering, commercial or operational decisions, Redei recommends obtaining advice from appropriately qualified professionals, including where relevant:
* registered professional engineers;
* licensed electricians;
* structural engineers;
* civil engineers;
* mechanical engineers;
* electrical engineers;
* regulatory authorities;
* legal advisers;
* financial advisers.
Continuous Improvement
Redei is committed to ongoing research, engineering and innovation.
As part of our commitment to continuous improvement, products, documentation and engineering methodologies may be updated without notice to reflect:
* technological advancements;
* customer feedback;
* manufacturing improvements;
* regulatory changes;
* engineering best practice.
Contact Us
If you require project-specific engineering advice or wish to discuss the suitability of a Redei product or solution for your application, please contact our engineering team.
Redei Enterprises Pty Ltd
Website: https://www.redei.io
Engineering Enquiries: engineering@redei.io (or your nominated engineering contact email)
General Enquiries: enquiries@redei.io
Location: Melbourne, Victoria, Australia
